ariadne-bootloader

ariadne-bootloader copied to clipboard

EEPROM.put and get does not work

10

_From @elik745i on March 24, 2017 15:46_ EEPROM.put and get requests does not work with newEEPROM library, can anyone fix it? or suggest the way forward... _Copied from original issue:...

loathingKernel

Cannot use http post method with ethernet.client when ariadne ethernet.reset in use

1

_From @PhilFluffy on February 10, 2017 7:33_ Hi thanks for reading this, I know its been a while since a release, but this bootloader is so useful to me I...

loathingKernel

Please specify fuses for alternative ICSP programmer.

1

_From @puhycz on November 11, 2016 15:25_ Hello, I try program this Ariadne-Bootloader to Arduino Mega2560 by [ASIX PRESTO](http://www.asix.net/prg_presto.htm) Programmer (I have only this programmer). When I open hex file,...

loathingKernel

getting error when flashing with tftp

1

_From @flintec on October 21, 2016 8:24_ i get a error from the arduino when im flashing using the tftp client take a look at this. this is the output...

loathingKernel

Bootloader burned successfully, Failed to upload bin via TFTP.

2

_From @whitesn on August 18, 2016 6:26_ Hello, so I am able to burn the bootloader and upload the "ReadNetworkSettings" sketch using Serial USB Comm. I am also able to...

loathingKernel

An error occurred while uploading the sketch; avrdude: verification error, first mismatch at byte

1

Dear All, I've uploaded the ariadne bootloader into my arduino UNO board and want to flash blink program via USB port. Getting verification error while uploading, _avrdude: verifying ... avrdude:...

titusece

avrdude: stk500v2_ReceiveMessage(): timeout

6

Hi, I have a Arduino UNO (Arduino as ISP) , a Arduino MEGA2560 (to be programmed with Ariadne bootloader) and W5100 Ethernet shield. As you have mentioned, I've followed the...

titusece

Sketches will not upload to Mega

5

Hello! I have a arduino Mega 2560 ans ITHEAD shield with W5100. I use Nick Gammon's guide to compile bootloader. I changed the bit lock (0x0F) but the program indicates...

Nekraus

Support for ENC28J60

2

_From @DarkSector on July 11, 2015 19:41_ Can we get support for ENC28J60 ethernet chip? This project is a very cool way to push sketches. How can we use it...

loathingKernel

Bootloader hanging on field application -2560

6

_From @andrebstv on February 20, 2016 13:50_ Hi, I couldn`t help but notice the bootloader is not protected by a WDT. I have a device on the field that from...

loathingKernel