Linuxonlinehelp

Hanging Area: openwebrx-httpd:ws,0] command: SET mod=nfm low_cut=-4000 high_cut=4000 offset_freq=0 csdr old_fractional_decimator_ff: window = HAMMING csdr old_fractional_decimator_ff: taps_length = 133 csdr bandpass_fir_fft_cc: (fft_size = 512) = (taps_length = 139) + (input_size...

After test Raspian Buster with Stretch Firmware on Kernel 4.14-98 no changes! Buster Default Kernel 4.19-75+4.19-79 fails with no logs !! Found infos about Memory Leaks, may be possible a...

Hi thanks will try that, i had same issues on: Odroid N2 4GB Hexa Core Ubuntu 18.04/Buster-Armbian Pi4 4GB Ram Buster-Raspian

Had same issues on Orange Pi H3 512MB - installed Armbian Stretch, Linux orangepipc 5.3.9-sunxi #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019 armv7l GNU/Linux i did: - fix csdr.c,...

@jketterl jketterl i did test the changes on odroid n2 but was NOT able to compile with make cause some of the NEON Parameters dont work, so i comment /...

i wrote to the Debian Maintainer of fftw3 to check this behavior cause newbies cant fix this and it makes openwebrx unuseable on ALL ARM OS 2019 setups , BUT...

info update: https://github.com/simonyiszk/openwebrx/issues/139#issuecomment-557186988

Update Info2 : https://github.com/simonyiszk/openwebrx/issues/139#issuecomment-560010335

Removing / comment out Markefile Neon Parameters will start make, but ran into errors. this is not running on odroid n2: PARAMS_NEON = -mfloat-abi=hard -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mvectorize-with-neon-quad -funsafe-math-optimizations -Wformat=0...

Update: Find out the correct Makefile settings for the Odroid-N2 NEON ARM Parameters: https://gist.github.com/fm4dd/c663217935dc17f0fc73c9c81b0aa845?signup=true#gistcomment-3111872