Jackie Wiggins

After building and flashing the lemp9 was bricked. Had to recover with external programer. Tested twice to verify it wasn't a one off issue

When running `./scripts/build.sh lemp9` I get the following error: ``` Cleaning up temporary files... ok You can now run i386-elf cross GCC from /home/system76/firmware-open/coreboot/util/crossgcc/xgcc. Welcome to the coreboot cross toolchain...

Still bricking forcing an external flash to unbrick. Are my steps incorrect? ``` git clone https://github.com/system76/firmware-open cd firmware-open/ ./scripts/update.sh ./scripts/deps.sh source ~/.cargo/env ./ec/scripts/deps.sh cd coreboot/ git checkout lemp9-variant cd .....

Where would I find these logs to share?

``` [11:57:26] Entering console mode [11:57:26] [11:57:26] System76 EC board 'system76/lemp9', version '2022-07-07_1add7ee-dirty' [11:57:29] Lid open [11:57:35] 84: Power switch press [11:57:35] 84: power_on [11:57:35] VA_EC_EN = true [11:57:35] DD_ON...

We got a 2nd 15" gaze16-3050 in that has never booted. It came with 2 others but they are 17" and boot fine. Flashed with this PR but issue unchanged....

~~Using lemp11, set to 40 90, drained to 84 and charged up to 90 but after discharging again to 84 would not charge past 85 even though the charge thresholds...

Do you have any network services like dropbox that could be slowing down the boot up?

How are you maximizing the window? Did you set a hotkey?

do you have focus on hover enabled?