Craig Hesling

> this is caused by an upgrade of the macos runner from macos-11 to macos-12? @hendrikmuhs, yes, I bumped the runner version from `macOS-11` to `macOS-12`, but the upgrade itself...

I was concerned that the restore and save actions might be somehow invoking different versions of sccache, like the error says: ``` sccache: caused by: Failed to send data to...

Looks like the difference is that using the GITHUB_TOKEN to push to a repo will not trigger subsequent action. Using the PAT will trigger them. See https://github.com/orgs/community/discussions/25702#discussioncomment-3248819.

Hi msadeghz, That's a good question. In it's current configuration, the LoRaBug should be able to operate in the EU 868MHz band. They typically just group in the 868 and...

Even with this newer firmware, there seems to be issues. After I let the machine sit idle for a while, it make have opted to sleep. When I woke it,...

> I'm testing out the mediatek firmware at tag [20240410](https://gitlab.com/kernel-firmware/linux-firmware/-/commits/20240410) to see if this remedies the issue. Unfortunately, this did not fix the issue. It rarely successfully connects to my...

Confirmed this is still an issue on Ubuntu 24.04. Lately, it has been failing to connect to the WiFI 6E AP about 25% of the time, but seems to always...

# Debian/Trixie on Framework 16 Slow Wake It also takes about 37 seconds from wake signal (keyboard or power button) to when the display finally wakes. I have attached the...

For now, I am just not using tailscale serve/funnel on PiKVM. I'm relying on the default behavior of tailscale to allow access to all ports on the device, through the...

That's unfortunate that we can't get CNAME resolution working, like referenced in [this](https://youtu.be/Vt4PDUXB_fg?si=MzoAHL9QuDJ34hEV&t=467) Tailscale example/demo video.