Daniel Li

Current repo code of gps&baro fusion method is same as 4.3.1, which is NOT that Good. Hope new way of fusion method is selected, such as iNav. Tests below in...

I might have the same situation. Try a) uninstall the usb serial drive when FC is plugged b) then replug the FC c) reinstall zadig d) replug the FC again...

does latest 4.2.6 support mavlink2 signing protocol? As I didn't find authkey settings.

> ArduCopter autopilot supports it. You can activate through MissionPlanner. I have not found a way to manage it through qGroundControl however. yeah, i have activated in mp. But i...

Well, what I have met is, QGC has trouble in vechicle setup page. I'm NOT sure about the other functions in QGC, and I will never try to fly with...

> How can I check or read the free pins to be sure if it is not the correct pin declared in the resources? It needs sch to verify if...

@Sekilsgs2 @ellmotion Have you ever tried to clibrate the current sensor? Or set scale /offset as ESC manufacture provided. [BetaFlight/iNav Current Calibration Guide](https://blog.csdn.net/lida2003/article/details/136000660)

> Im say that im using bayac rc dolphin FC! Please read again my post. @Sekilsgs2 @guowei681 I think @ellmotion is using NeutronRCF435MINI (AT32F435G). But I'm NOT sure if he...

Any idea to improve the low latency when using higher resolution #33 I have the same question here. From the above discusions, I found that esp32 camera for PFV is...

2023, still don't have bdshot supported yet? > There is a clone of the repository where this has already been done. Any chance to include it here?