LH

Confirmed, and seems to be brim related as @cbaugher said.

I'd like to confirm that Infill direction setting is still broken in 1.7.0, and we could reproduce it between multiple people.

[settingsconflict-wipe.zip](https://github.com/SoftFever/OrcaSlicer/files/15142363/settingsconflict-wipe.zip)  I deleted all the settings, moved everything to the default install and the issue kept coming back. In the end I traced the issue to **OrcaSlicer.conf** when the...

> Wait sorry. Would you be able to explain this further, or confirm if my understanding is correct? > > Basically, you're saying that if you've sliced something with the...

 I believe the issue was with some profiles which had these overrides enabled, and which were pretty hard to spot. I'll close the issue and monitor the situation.

Looks like you also have unwanted slowdowns in non overhang places that will cause artifacts. Like reported here: https://github.com/SoftFever/OrcaSlicer/issues/4553

Some more examples of perimeters "growing" into the bridge area  With one wall the bridge can actually bridge 

[Impossible Cube.zip](https://github.com/SoftFever/OrcaSlicer/files/15326666/Impossible.Cube.zip)  Curious if anyone can make a successful bridge layer (independent of model rotation) )when setting the perimeters above 5 on this impossible model.

That could work if would be possible to print perimeters at 90 degrees in the air. The perimeters will still be printed in air with support only on the lateral...

@buzzhuzz that's a good trick! I managed to do something similar in SuperSlicer by using custom settings and bridge orientation. That only worked in one direction sadly. Unfortunately, for me,...