lemontreeau

> Which Armbian image did you use exactly? Because we use the Armbian build system for our kernel packages as well, so it should be the same, unless you use...

> Which Armbian image did you test? > > And could you try to update the SPI bootloader via `dietpi-config` > Advanced Options > Update SPI bootloader? Probably the original...

> Okay so no difference between vendor kernel sources (Linux 6.1) and mainline kernel sources (Linux 6.12). Good to know. Still not booting after updating SPI bootloader in dietpi-config. I...

> Armbian uses the dts with the the 12V as well for Linux 6.6 (where no mainline dts exists yet). Btw, with that image, Ethernet does not work on v2.1...

> [@lemontreeau](https://github.com/lemontreeau) Btw, does the NVMe port work when booting from SD card? Can it be mounted etc? Yes, the NVMe SSD can be mounted when booting from SD card.

> Oh another interesting report: https://forum.armbian.com/topic/33615-boot-from-nvme-no-hdmi-from-sd-card-ok Since you also mentioned "Black screen.", do you have a chance to check whether it otherwise booted, like whether it connects network? Boot from:...

> Okay then it does not seem to boot at all. Could it be some power issue? You have a good 5V 3A or higher PSU? An NVMe SSD does...

> Just in case, could you test that image based on latest bootloader and kernel? https://dietpi.com/downloads/images/testing/ Tested. Same. Not booting..

> any chance you get a UART adapter to check bootloader and early kernel logs Don't have UART adapter :( I'll start looking for one now..

Message from the USB-UART adapter.. Missing dtb file? And an issue with the OP-TEE firmware? ``` ... is now current device Scanning nvme 0:1... Found U-Boot script /boot/boot.scr 2711 bytes...