Lê Hoàng

> Now, it is working!  Hi, did you change anything?? still doesn't work for me

Change this json response value to `"value": "{\"publicKey\":\"public key or something\"}"` [bumper_confserver_v1_private_common.py](https://github.com/bmartin5692/bumper/blob/master/bumper/plugins/bumper_confserver_v1_private_common.py#L121C9-L121C9)

> @lehoangnb : Thanks for your response. Should I put the literal string "public key or something" or should I replace it with the public key of the bumper certificate?...

Set egress rate on router to 1244Mbps [like this](https://github.com/Anime4000/RTL960x/blob/main/Docs/SlowUploadSpeed.md#mikrotik-gpon-flooding-mitigation)

> > the PON Stick has very small CPU and Memory, RX/TX Flow Control hard for the Stick, larger memory like Huawei MA5671a have support Flow Control. > > this...

> I wasn't successful in rewriting the chip, but I think I burned the power circuit of the old SFP by using my soldering iron on it, which isn't ideal....

> With the memory soldered on the board, I was unable to read and write. Maybe programmer not produce enough power

> I have tried read SPI Flash direct from the board, thing is, the 3.3v is powering the stick when I start reading from CH341A > > That time, my...

> your Programmer much better than CH341a that I have. > > May I know what programmer are you using? > > does Programmer software has automatic SFP EEPROM Checksums?...