Laurent Deru

Hello, It is possible, yet never tested by us :) A radio driver for the Linux WPAN interface has been integrated recently in Contiki and can be used by 6LBR....

The easiest is to use the PAN-ID to create two virtual network completely independent of each others. The PAN-ID can be modified in 6LBR interface or configuration files. On the...

You can't ping a specific node using NAT64 as NAT64 relies on ports to do the address mapping and ICMP Echo does not have the concept of ports. Instead you...

The cc26xx-web-demo is using the RFC-6052 NAT-64 prefix 64:ff9b::/32 , but 6LBR uses the default Contiki NAT-64 prefix ::ffff:/32 To make it work, you have to enable RFC-6052 in the...

Sorry, I thought it was solved !

Without a slip-radio connected, 6LBR won't start up. Though you should have a 6lbr.log file with a repeating line saying that it waits for the slip-radio. As yo don't have...

Indeed, the slip timeout is now 200ms instead of the previous 2 seconds. As you receive an ACK of an unknown packet it is clearly a too short timeout. Now...

Bridging to a WiFi interface is complex and depends on several factors (and the old faq ins't really helpful about that, I will update it) To have WiFi bridging you...

@janeksz If you intend to use the routing interfacing, with your configuration you are still bridging wlan0 and tap0, which does not work. You should have in your 6lbr.conf file...

@florian-popup Thank you for providing such detailed information, I will try to digest it and improve the documentation :) Maybe your configuration could be simplified by switching to SmartBridge mode...