laubzega

Please make sure to check cache invalidation next. ;)

@amerika13 Do you have a scope? It would make sense to check how TCK, TMS and TDI look at the board end, and TDO at the programmer end.

I was able to program the board using OpenOCD 0.11. You will also need: - The firmware in SVF (which I converted from *.pof using Quartus, but in principle it...

Are you able to only connect GND coming from the analog cable?

Unlikely. The screen with #36 is completely unreadable and skewed to one side. Here is just minor wiggling left and right.

Then indeed. Apparently #36 is about two distinct issues.