Anton Viktorov

@yoshilex I checked Arduino's library, it looks like MKR boards use pins 3 and 7. ``` // Arduino MKR board: MKR CAN shield CS is pin 3, INT is pin...

@yoshilex As for J1939 - this is a data protocol working on top of CAN 2.0b, so any CAN Bus Shield/board will work. In simple words: - CAN Shield knows...

Very strange, for first glance i don't see anything on MKR GSM board which might prevent Can shield to work... Maybe some faulty trace/connection. If you want to hunt down...

You got it right! Mw3 I believe has almost same firmware. Please try and let us know. Thanks

@tiagoclc how does this Twibi relate to Tenda? Is it some kind of rebranded product?

yeah, thats risky. Another thought - Redis is used to synchronize/propogate configuration changes, maybe one can write the needed change to redis and it will copy parameter to other nodes

i think major question is how much ram is available now. russian guys tried to port pjsip to stm32 with 192k ram and after a lot of pain did that....

here are g711 implementations for reuse http://tomeko.net/projects/rtp_pager_eth/index.php?lang=en and https://github.com/fnoble/libopencm3_old

@scottty27 @RobinE there is still room for research - to find a way to inject a script or have ssh or telnet up and running, so any following changes can...

BME680 component shall work with 688 except for one piece of data I believe