laimison

Thank you, that is useful information. Can you let me know your mainboard model and Pi0 build? My one is Strix z270e Gaming Intel z270 lga1151 ATX and Pi0 build...

Thanks a lot! I have ordered additional SD card for Pi Zero so will try this image and some different computers.

This is v1.3 Pi0. It's based on Readme.md: I'm using USB serial cable from Pi3 to Pi0 (4) pins. It can be powered from this source. Also I have USB...

Yes, I have noticed this as well related with HDMI to USB powering. I have finished this project and left this device abroad so wanted to share what I've tried...

Check if you have ErP or EuP enabled in APM section. Usually, it's not by default. I follow this procedure: 1) Powering off the machine 2) Trying to connect to...

If I understand correctly usually Pi0 is powered from the source which was connected first. So there should be a possibility that your machine powers Pi0 through USB as any...

Just to not expect an answer from me for your plan, unfortunately I didn't get deeper into driver issue. In my case I have solved this issue for hardware which...

Hi guys, Thanks for this issue raised. I have ordered LKV373A sender as well so cannot promise, but will have this unit in front of me and try to add...

I have found that removing `modules-load=dwc2` from `/boot/cmdline.txt` and `dtoverlay=dwc2` from `/boot/config.txt` seems sorted the root cause in my case. I came to idea to remove this because of `[253805.452822]...

I wanted to share a resolution. An second issue solved by changing `avconv -f video4linux2 ...` to `avconv -f v4l2 -standard pal ...` in `/var/www/html/image.php` so it fits into the...