kvid

I'm curious - when do you need to specify font face, point-size, and color? Is it for `neato` only? It seems to work without in my simple test to PNG...

@olmari - Be aware that both #286 and #48 might be worth visiting. Please try the work-around I suggested in https://github.com/wireviz/WireViz/issues/286#issuecomment-2094309143 that might help you while waiting for better solutions.

@tobiasfalk - I'm grateful and impressed by your effort with this issue, and obtaining a great result in such a short time! I'm sorry that I have not yet had...

> Solid Bold seams quite good I agree, and it's also a good fit to https://github.com/wireviz/WireViz/issues/48#issuecomment-656802355, but I hope we also can get opinions from several others before deciding. We...

Some details that have not been discussed in this issue yet are: - About the YAML input syntax: I know that `internal_shorts` and `external_shorts` were suggested in #48, and the...

@tobiasfalk wrote: > [...] > I think the "internal" emphasis that this short/connection is inside the Connector housing and not a wire loop that may go outside and than back...

Deciding whether shorts should count as `populated` or not is not a philosophical question. The `populated` multiplier is e.g. used as the number of crimps or pins (at the mating...

@olmari wrote: > @kvid mm... I see what you do say... All I can say for my "stance" is that what I linked in previous message is the thing... That...

My suggestion of `populated` and `connected` counting doesn't fit well with the term used for the `hide_disconnected_pins` option, so we might need a general discussion about terminology and create definitions...

@tobiasfalk wrote: > Then the actual wire is drawn from the right (east) to the left (west) side, this needs to be done with two wire because the straitening method...