Thomas C. Kübler
Thomas C. Kübler
Works nicely for me, thanks!
Had the same issue (stuck at orange+green) today after experimenting with a powered USB Hub. No clue whether related to that or not. Had to connect the force fastboot pin...
Thanks @saket424 that will hopefully save some time in case it happens again. Connecting a display doesn't help either, as nothing is displayed at the stage where it fails.
Also, I need to unplug the cameras after each reboot so that they are recognized as cameras. I guess the board switches from device to host mode that way. Perhaps...
@manoj7410 I tried that first, but I guess it depends extremely on the codec used. Also, I didn't really figure oput how to configure the codecs in detail using opencv...
Am I doing something terribly wrong or has noone ever tried to write a decently sized video to disk on one of these boards? I started dumping jpeg frames compressed...
@manoj7410 960x480 @ 30 fps
So nobody had the problem of recording/encoding a video on a coral dev board before?! Everyone just streaming?
> @kueblert , I have to do H264 encoding for 1080p resolution image at 30fps. Considering this issue, I believe it is highly impossible to achieve it without hardware accelerators....
> @HungryNerd-exe I would use GStreamer overall but unfortunately the iMX8M does not include a hardware video encoder (only a decoder). You could do SW encoding in our GStreamer pipelines...