Keenan Tims

I came across the same problem, and would also appreciate some simple example code somewhere. The key step for which clear instructions are missing from almost everything I found online...

We have built our existing templates around combined policy-statements. Usually other route policy is shared between address families (e.g. communities, any peer-specific policy tweaks, etc.), and I don't see any...

The obvious solution here seems to be to allow admins to assign their own tailnet prefixes, so that an *appropriately sized* prefix can be allocated like you would any other...

This is caused because the behaviour of Flask OIDC is to build the redirect URI itself. As described in the [doc](https://flask-oidc.readthedocs.io/en/latest/#settings-reference), `OVERWRITE_REDIRECT_URI` needs to be set to the correct URI...

@Noxime I don't have the setup handy on my bench right now to confirm this code is working, but I am 95% sure it does. You must use `arch-spin` and...

> Hm, I gave your branch a go and still nothing. I checked the EVT documentation and it does say that the 2 ports are connected to PA11 and PA12,...

tl;dr it looks like the driver requires a 1MHz tick rate to be reliable for now. Lower tick rates YMMV. I wanted to use a lower tick rate than the...