Daniel Krook comments

Results 604 comments of


                                            Daniel Krook

Deep analysis about the sensors to include in the IoT device (5 smoke sensors+GPS+flash memory): Carbon Monoxide, Nitrogen Dioxide, Acrolein, Formaldehyde, Benzene, GPS and flash memory.

We'll need to document these findings and prepare for a future iteration

Tester/QA: Validation of entire system functionality

Updated description.

Improve platform administration: firefighters, prescribed burns and fires, IoT devices

Will need to do this incrementally: - [ ] Set up dashboard for each of the weekly field tests - [ ] Ensure that the system is later multi-tenant

Designer - Articulate Storyboards for phase 1

This should be updated for our October 1 MVP.

Hardware engineer: Define stress test parameters

[Slides 8 and 9 in the kickoff deck](https://ibm.ent.box.com/file/673929881573) describe survey results and therefore priorities.

Hardware engineer: Define stress test parameters

@svaleroc can you please share any additional documentation you have from the field test survey?

Hardware engineer: Define stress test parameters

@zachge01 It would be good to get an assessment where we are with the latest design and these needs.

Develop mobile app with the 2 main capabiliest (real time and historical data) for testing Samsung phone, watch and APIs

I think a simple notification on the phone and watch is best as the MVP. This would be based on the short term average, not an instantaneous single reading.

Develop capabilities in the mobile app for the firefighter to give feedback about his situation before, during of after the fire.

This should be created for a later field test.

Define and develop an easy way of enrollment for the IoT device with the phone and the platform

This will be connected to research on the Edge architectures. Initial thoughts are in [EDGE.md](https://github.com/Code-and-Response/Prometeo/blob/master/EDGE.md)