kripton

The easiest way to achieve this is most probably to: * start jack server the way you would normally do (i.e. don't have it start automatically by dbus or similar)...

Hm, it looks like the QLC+ is already prepared for all this: There's lots of different supported audio backends in https://github.com/mcallegari/qlcplus/tree/master/engine/audio/src . Maybe adding JACK wouldn't even be so hard...

Thanks for bringing this up again. Since QLC+5 has a keypad by now (see https://github.com/mcallegari/qlcplus/blob/master/qmlui/qml/KeyPad.qml), I would propose to sync the two implementations we have now. Either we adapt this...

> There's a script somewhere to do the job already I think. Alternatively someone pointed out a different GPIO daemon which would work on more than just a Pi which...

Reply to myself: I've just found this one: https://github.com/OpenLightingProject/ola/issues/1385#issuecomment-396051825 which is probably the one @peternewman was referring to?

Hi, I'm jumping into this discussion since I was mentioned by Peter due to the compression tests I did (Thanks for hinting this are me!). First, let me state the...

Sure, I will give this a try the coming days. I have multiple `fx2la` devices here, one Open Bench Logic Sniffer and a scope that can be theoretically hooked up...

Okay, first results. I tried the scope in pulseview first. I was able to see my DMX frames but I was unable to do continuously capturing. And reading from the...

And something about the cli parameters seems wrong. The FX2LA-device is shown in `sigrok-cli --scan` as `fx2lafw:conn=1.8`. However, when I specify this as value for `--sigrok-device` at the `sigrok_rdm_sniffer`, it...

Okay, the thing with the scope in pulseview is a bug in the current sigfox release. Fixed in git but no release since then: https://github.com/sigrokproject/libsigrok/commit/704910e32ca97421e59009f1e384b9fc94a5a75b and https://github.com/sigrokproject/libsigrok/commit/1cbb3b1cfbd0334001bde052413cc7aa869d5994