kraus-wagner

@koenvervloesem Good article! I read it with google translator. ;-) @sieren Great project! I was looking for a touchscreen for an ESP32 or ESP8266 to send mqtt signals to my...

Yes i found that project too. But the Core2 is ready to go. I ordered 2 from digikey.de for 39 Euro each. https://www.digikey.de/product-detail/de/m5stack-technology-co-ltd/K010/2221-K010-ND/13151126 If your order is over 50 Euro...

I use the Arduino IDE. There i have to change the library from "#include " to "#include " for example to run most code for the Stack on the Core2....

Ok i see. It is much more work than changing a library. But i hope you like your Core2 and will have time to make homepoint run on it. ✅

I uploaded the new core2 binary and have access to the web interface. I change the config file, so the Core2 is in my wifi network. But the screen stays...

Now it works! I made an OTA update and a reboot. "displayColorInverted": "true", must be removed from config if previously has been added. Now i can do a little testing...

@jpiscaer Hi, i first flashed the core2_full binary. Then connected via the browser to 192.168.99.1 and entered my wifi settings. Next reconnection via the new ip in my network. Last...