Marko Lukat

Thanks, I'll have a look. I knew this resolution was around but could never find conclusive timing :)

We are on the same page then. Admittedly, my proposed version is harder to read/understand but was the quickest way to get it working (minimal change). How is this handled...

Fair enough, anyway it's not getting lost (anymore). When I tested it I had a nice big 32" TV available. IIRC there is even an evidence picture in the forum...

Also, how do you get the data off chip? You'll need at least 128Mbit for CS16 (64Mbit for CS8). For me - using a 3B with full 64bit install -...

Didn't try SDR++ yet, is it possible to convince it using the **CaribouLite** as remote device even on the same machine? Something along the lines of ``` remote=127.0.0.1, driver=remote, ......

Have a look at #82, HTH.

That's OK. I started with a **full install** (lost to ESD) but right now running on **lite** (no screen requirement). Just thought I mention it :)

Mirroring appears to be sorted https://github.com/cariboulabs/cariboulite/issues/70#issuecomment-1446268724

re: **i2c_vc**, I run happily without it. AFAIK it's only required when you actually access the HAT EEPROM (either reprogramming or as a fallback when the OS HAT detection failed).

> Anyway, I also got OpenWebRX installed successfully and was trying to set the Caribou as the SDR but got another error. If it has nothing to do with the...