Mike Kolcun
Mike Kolcun
Regarding compatible hardware - I've got a clarification question that hopefully you guys can assist with. Is the intent for this project to connect the raspberry pi via the USB2RS485...
Fantastic. I’ve ordered some of the parts I need. I’m looking forward to trying it out this weekend
I've found a 12VDC wall wort, hopefully that will work versus the 10. @Griffon1967 You mentioned your utility, is this something different than AquapureD that you're using to debug? If...
@Griffon1967 my pump is currently controlled via a custom home automation system, using the relay controls that the pump offers - that's working very well. My desire for the SWG...
At this point I'm keeping the SWG/485 separate from my main controller. So if if your utility will help with getting the pi to connect directly with the SWG via...
@Griffon1967 Thanks - I'll give it a try and let you know what I find out.
Hi @Griffon1967 So I was able to test your code tonight. Supplied 10V to the connector on the AquaRite and connected to my RS485 interface. I ran it 25 times....
@Griffon1967 I didn't get a chance to try the AquapureD code yet - Will try that next, same for the new version of your code. Is there a programming guide...
The updated code isn't working correctly for me it seems. My consistent output is ``` pi@poolpi:~/AqUART $ ./aquart using device --> /dev/ttyUSB0 open UART read attrs cflag = 2237 sent...
@Griffon1967 No lock up for me - if I ran the code once, it flipped back to local control after a few seconds. I also ran it in a bash...