Kristina Armstrong
Kristina Armstrong
Issue overview -------------- In the suite: Will have to update bindings and GasCompositions method to optionally take in a heatingValue, if the heatingValue is passed would skip the calculation for...
Issue overview -------------- It looks like we don't have Doxygen stuff for most of the TH calcs. We should do this. I think the imperial units are usually what is...
Issue overview -------------- Can we use the Steam properties calculator to estimate the enthalpy of water vapor in combustion? Issue details -------------- From Keith Woodbury 2012/01/23 Regarding the latent heat...
Add small DB like for fuels, charge materials etc. for lighting fixtures
See MEASUR Issue #2312 use PumpShaftPower::calculate() `motorShaftPower` = "Motor Power" * "Average Motor Load"
Most of the previous FSAT assessments seem to use the fan impeller diameter instead of the speed for the curves. Need to find curves
need to be able to have the UI send specific speed and return efficiency for a given fan type to make curve like in FSAT2004 and PSAT could break OptimalFanEfficiency.h...
Use AMCA 203 calc to just have the fan traverse part (Plane 3) What all is needed for the calc of flow rate?
Process Heating > Heat Cascading Calc doesn't provide results with valid inputs unless you first generate an example Process Heating > Waste heat for absorption chillers "Calculate" link for available...