knopserl

@sandeepmistry and @lpercifield there where some start to support the nRF52840 with it's very very interesting BLE 5.0 (long range) options and ZigBee support. That is a big improvements to...

@hanyazou it's a good start. There are some popular nRF52840 missing such as the PCA10059 (USB dongle) and the modules from holyiot and EBYTE. That would be perfect. Another promising,...

@krzychb Thanks for your replay/hints. The reason why I was asking was because I saw the thread in the ESP32 forum which advises to not directly to the CW to...

@krzychb Thanks. That is where I was comming from. I used a precalculated sine sample value array (at compile time) or a calculation during runtime before feeding the I2S output...

@krzychb thanks a lot for your willingness to spend time for my problem. Here is the description: I need a sine sweeper which has a lower and upper frequency input...

@github-ec Thans for testing/spendig your time. I was also trying it with a sine wave generation in RAM and play it via internal/external DAC (using I2S). But the ESP32 seem...

Thanks I found at least a solution for the SP111. It can use BLITZWOLF_BWSHPX but the pin-assignment for CF1 14 does not work, it is 4. The SP112 does not...

it would be very helpful and extend the flexibiliy of espurna, if we could change pins after flashing such as tasmota is doing with the profiles. So the SP111/Blitzwolf BW-SHP5...

@mcspr That is already a very good start if the 3 power monitor pins could be reassigned afterwards (if the chip is the same). The SP112 (BW-SHP6 has even changed...

As a good start: Mainly the new energy sensor chip HJL-01 need to be supported. Within the ESPurna and Tasmota projects, this was already implemented by extending the common used...