pi-build
pi-build copied to clipboard
km4ack
Fresh Raspbian 32bit installed on a 8GB Raspberry PI 4 (not overcloked yet), and running Build-a-pi for the first time (installing all the supported apps). The script hung for a...
https://github.com/km4ack/pi-build/blob/e7b8436fa81661da302589682f6e9ea9dbdc23f8/conky/.conkyrc#L94 I think a long time ago you had this but went away? anyway not a fit all but fun
Add a check for empty $LATEST variable. This state can occur if the system does not have a working internet connection.
https://github.com/km4ack/pi-build/blob/e7b8436fa81661da302589682f6e9ea9dbdc23f8/build-a-pi#L523 making a backup before modifications if disrupting display (it will on a ribbon attached display)
I understand the Pi has a hardware watchdog timer on board, which can reboot the Pi if it becomes unresponsive. I think it would be very handy to have a...
Without this build my pps time signal works fine but when build a pi is installed my pps signal just times out and is therefore unusable. Also my NMEA output...
This is a simple typo fix... but somewhat related to this: Is the check to test for network connectivity working okay on the update script? Related to this: https://groups.io/g/KM4ACK-Pi/topic/84929389
Ran through the install and build on a Pi3B+, RaspiOS Bullseye, 32GB USB Thumb Drive, Digirig 1.9. - - - - - lsusb Bus 001 Device 010: ID 10c4:ea60 Silicon...
Did not select to load VARA since I have a Pi 3b+. The build script is hung up at the line 'updating VARA shortcuts; 15 minutes no change.
I tried the solution listed on Github Issues, but the last command returns: kent@raspberrypi:~ $ sudo mv autopostreply movetopat /var/www/html/~ mv: target '/var/www/html/~' is not a directory Has the issue...
