Gerhard Potgieter

The issue seems to be related to the use of the `get_next_post` and `get_previous_post` functions, they do not support custom orders so Storefront will need to work around that by...

Hey Patrick, not getting the same results locally with object cache enabled or on our site which also runs on WPEngine. I would check the order status and perhaps the...

To test this theory, I have gone ahead and set up a Riennman Sum Integral sensor on the CT grid sensor value, and then setup a Utility meter sensor on...

The problem with total_grid_import is that it does not keep track of non-essential energy usage if the inverter is in limit to load mode. My geyser for example has a...

So the custom sensors have been running for a day now and so far they match up with my actual grid usage fairly accurately. I will give it another couple...

According to my calculations, the custom sensor is working as it should and reporting correctly. I am just waiting for my next monthly bill to confirm 100% that things align....

The workaround is to set up a new helper sensor using Riemann Sum https://www.home-assistant.io/docs/energy/faq/#creating-an-energy-sensor-out-of-a-power-sensor that is based on your CT power sensor. So using the addon, expose `Grid CT power`...

I finally got a reply from Sunsynk on this issue after 3 weeks, no surprise it was a generic one saying to update to the latest firmware, which I did,...

> Cans are aluminum, wont register on inductive sensor. Will need an optical one. One would think it won't but it actually does. 3D Printers use the same inductive sensors...

@N3MIS15 yeah that is what I was talking about, thanks for taking the time to implement this. Will see if I have some time over the weekend to give it...