klausahrenberg

Ok, your device didn't find a wifi and then it goes in AP mode for configuration after some minutes. You are suggesting that in this state, the device should reboot...

Ok, thanks for report for this device. I will have a look at this in new year. Maybe I have to reorganize the firmware to reflect all the different models...

Checked with my devices. It seems a special disadvantage of BHT-002 device. My other device (ME102H) stores the changed values via MQTT: Description of bug: All changes at parameters that...

Ok, here we go. I still have an inner resistance to solve a device bug... I also own a BHT-002, I have not so much power interruptions, but anyhow -...

I will take a look into it

The command is at the 6. place - your command is 2d - which is the byte for the floor temperature value at model ME81AH. The selection of the sensor...

Ok, I implemented this for my device ME102H. I copied this implementation for your device ME81AH also with the command byte 2d. But I need a different byte for the...

Ok, here we go. Please test following in v1.20j: * Sensor selection should work now (byte 02b). * 0x2d is now floor sensor value again. All of your other given...

Hi, I changed some things in v 1.20l: - Unknown MCU command will not arrive anymore. Function of command 0x2d is not clear, I have the same on my device...

It depends on the device, would be helpful to know. At firmware 1.19 and device BAC-002 you have to press the down button, until the screen and wifi symbol flashes....