Klaus Gebert

Thank you - Interesting.. I will follow this development

Latest changes work fine for my installation My Li2.1 is currently in remote standby (FW 1992) values for Battery temparature seeme not to be availabel in this state (-126 °C)....

I think the problem is that there are 2 differennt ways of WB integration: - people who buy the WB including the SENEC software package have less need for more...

Meanwhile I have the feeling that this is somehow linked to a fragile network cable connection. In-between I had some days w/o any problem and today I had the failure...

For me the problem seems to be solved locally. My SENEC is connected to a WiFi-Access point and after improving the WiFi in general and changing the AP from a...

I think I opened it due to a specific issue (on my side) which is solved But if there is still a need I reopen it

When I experimented with these functions from the UI I observed strange behavior and later found that SENEC limited my battery to 70% - which is still status. I delay...

In my last test the battery after being fully charged with that function did not return to battery operation - a full night of consumption was taken from the grid...

My question is: when using the updated branch do the entities keep the same or do I have to change all authorizations and dashboards?

> > ...the v3 has the workaround “emergency charging” via http request... > > in my fork (obviously for v3) I have integrated this as ha-switch... [called 'safety charging' (will...