kkossev

This device should be very similar (if not the same) as _TZE200_lve3dvpy The clock synchronization should happen on Tuya request command 0x24, same way as for Tuya thermostats and TRVs

Finally, a good one? - not a spammy device !!! Presence State 1 Human Motion State 11 Presence Keep Time 12 Motion Detection Distance 13 Small Motion Detection Distance 14...

@tribalRu do you know what the 'breathe_flag', 'small_flag' and 'large_flag' do?

> I bought 20 zy-m100-v1.4 to put on the same network with 40 other devices, Put the spammy mmWave radars on a separate Zigbee network ... Just add a second...

@gargarse the time sync is requested by the thermostat every time you switch its mains power supply off and then on. BTW, no success with the time synchronization for this...

You can experiment with purchasing one of the new Tuya Matter Bridges (get the cheapest one; all different 'brands' like Zemismart M1, Moes, etc, etc... have the same firmware inside,...

> However the device is still repeating the 0x25 command, so the exepected response does not seem correct The payload for the 0x25 command answer should be 3 bytes -...

This device is rather different than the rest of the presence sensors based on the Tuya platform. It uses the standard ZCL cluster 0x0400 for illuminance reporting and the IAS...

Amazon reviews are good, I would wait some more days or weeks, it will be surely supported in Z2M sooner or later ... The form factor of this device is...

This device also exposes the illuminance via the standard ZCL cluster 0x0400