Jack Li
Jack Li
I do not have a change to test the ppm to FC scenario, but I out put ppm to a usb dongel works fine. My suggestion is first to test...
This is not an issue
SimpleTX support ELRS 3.0 in the way that gimbal data can be transfer to the TX moduel, because the communication between TX and the transmitter dosen't change since ELRS 1.0...
Do you want to build a module or a full transmitter?
> I would like to build a transmitter, and I would like to use supported MCU & transmitter ic combination. Check out my repo https://github.com/kkbin505/Arduino-Transmitter-for-ELRS/tree/VSCODE It use arduino nano, and...
There is a ELRS handse, but it is out of date. 我和你有一样的想法，所以我设计了这个ELRS遥控器：https://github.com/kkbin505/Arduino-Transmitter-for-ELRS
Did you make it?
This is a discussion more than an issue. I suggest moveing to elrs discord for further discussion.
In order to use arduino mini as decoder, you have to reset the baud rate from default 420k to 115200, because the arduino can not handel the baud rate so...
How did you connect the switch. For 2-pos switch, it should be connect 1 pin to the one of the digital pin you declared and the other pin to ground....