Cameron
Cameron
I have a similar issue with just one of my 4 cameras. I can barely get 15 minutes of uptime from it before it's connection drops. The Camera appears fine...
I updated about 4 hours ago. Looking better here too - all cameras are still up. I’ve stuck with ANY (LAN mode).
I can't remember why, but I have a hosts section in my config. Here's a copy, to help you fit yours in: ``` { "bridge": { "name": "Living Room HUB",...
Hi @Cocco17. Unfortunately this project seems to have been abandoned again. The good news is there there are forks adding RM4 support. I personally have done work on the [broadlink-rm-pro...
Done 👍 4.2.9 or 4.2.10-beta will support your device.
> @kiwi-cam I have an RM4, and installed your fork but i do not see my RM4 identified by homebridge - how can i get support to my RM4? If...
When you start homebridge does it find a device? You should see something like: `[Broadlink RM] [INFO] Discovered Broadlink RM 4 Pro (6026) at 192.168.x.x (24:df:a7:xx:xx:xx)`
Do you have the RM4 Pro setup in the Broadlink app? If so (by default) local network access is blocked: https://github.com/kiwi-cam/homebridge-broadlink-rm/tree/kiwi-cam-beta-1#documentation
Take a look at [#45](https://github.com/kiwi-cam/homebridge-broadlink-rm/issues/45). Currently testing it in BETA. It'd be great if you could try it out and let me know of any issues.
You're right. I don't have 649b. Could you let me know what device you've got and I'll get it added?