kiteretro

Hi, yes I will do this, I'll update here when I have pushed the source, I appreciate your patience! :)

Better late than never! I have added a basic README describing how the src works. I have no doubt I may have forgotten to add some steps, for example libraries...

Could you please show a picture of your soldering of the 3pin cable that plugs in to the main board? Also, the 4 little switches, what do you have them...

Hi, for the Gem are you using the latest software version available? There was a known issue for that :) you can see on the gem wiki FAQ that there...

Ok cool, in that case it it is likely one of the solder joins of an important signal. Let me know how you get on, and if no joy I...

This picture is a view from the side with the LCD connector on (pictured). So if you orient the board so that you can see the LCD connector and then...

Ok, let me know how that goes, if no improvement I'll replace your board

Send me an email to [email protected] and we’ll sort out returning it and I’ll repair :) > On 11 May 2019, at 15:15, rhinom2 wrote: > > Hi, I'm really...

Agreed.. so the following should probably happen: - Don't copy config.txt if it already has DPI (or some searchable) settings already applied (I see in my code there is a...

Thanks, I can pre-install it as part of the script and I'll try it out.. i've always used Pixel personally, but willing to give a go :) https://github.com/rxbrad/es-theme-gbz35