kirk444

I think at it's simplest, a rack could have new (optional) "mounting" locations added for 0U devices (rear-right, rear-left, front-right, front-left) which would indicate the physical location of an installed...

I think the "sidecar-type" rack representation would certainly work for my particular use-case, and the exact visual representation is not critical, something shown horizontally (despite being physically vertical) would still...

Thank you for taking a look. cbmem: https://pastebin.com/f5UYtgfU dmesg: https://pastebin.com/FecHUZrk I should add that the built-in NIC for tidus has, I believe, the same PCIID as the one I am...

I removed the wifi card, and installed the ethernet NIC into the vacated slot, here's the new cbmem output: https://pastebin.com/xYtbfRaF What do you mean by "the one on the card...

It's on the motherboard, between the wifi slot and the cpu, here's a not great picture, but you can still see it: https://www.ebay.com/itm/223823187600

Yes, here's a cbmem output: https://pastebin.com/qf5FPN0p I put the wifi card back in the original slot, and then added a second (spare) wifi card in the other slot, both are...

Is it possible that because both the M.2 NIC and the onboard NIC have the same PCIID that they're colliding somehow? I noticed that my second 7260 actually has a...

Don't have access to that other one at the moment, I'll find something to put it in and get the requested output though. In the meantime I might have bricked...

Here's the output from lspci from another host: https://pastebin.com/kUAJZjnU Also, good news, not bricked, just doesn't want to output over displayport anymore, using HDMI for now.

I've confirmed that a PCIe wifi card works fine in that slot, and also that a SATA SSD does not, I do not believe that your observations are correct. "SATA...