kipper2k

Hi Ian, Thanks for the reply. I will show you some pictures of my A500 so you can see how it is actually setup. (The left monitor is attached to...

here are pictures   

Hi Ian, I pulled the pins from the amiga when testing the Pi. The only active connections from the Amiga gotek to the bluepill are SCL (B6), SDA (B7), 3.3v...

@IANSB i tried beta16 still nothing, i looked at the b15 output on my scope and i couldnt really get a good look at a decent signal, seemed like a...

wow... it works i was not leaving the sync line connected, i will take a pic after supper Awesome stuff :)  So to recap... add a 1k resistor to...

Here is the pinout for the OSD output to HDMI on the A600, i believe all models have the same layout...  - purple wire bluepill B15 -> pi Header...

shorter tracks definitely increase performance, if you increase track lengths then you should ensure that decoupling caps are as close to IC's as possible. Also extending the board over other...

for the header pins to connect to Denise socket you should use something like these... search in ebay "5Pcs Gold Plated 2.54mm Male 40 Pin Single Row Straight Round Pin...

The longer thiner ones are better as they dont stretch the sockets too bad and for the end user who puts the socket in, it is less likely to be...

Hi, I have the blue pill connected to the gotek and also have the outputs of the gotek connected to my keyboard that enables menu selection using the keyboard. The...