kipper2k

@c0pperdragon Thanks for the comment, I have just designed an a500/a1k/a2k design also that should fit in all of these mentioned models. Hopefully it is all good and if proven...

i had this done by jlcpcb so not sure what issue is with pcbway. The inner square is identified by dimension layer. The inner square is 0.800" square and is...

it will fit, it sits lower than all of the custom chips all a600 accels will fit

just to prove it, here is one of my a600s...  no issues at all, the FFC cable allows me to place the other portion pretty well where i want....

k, 1 more picture to prove its not an illusion... 

yah, pcbway charge more for any design that uses 0.005" traces, if i had used 0.006" then price would be comparable. I prefer to use the smaller traces for boards...

yup, C5 is 0.1Uf

I am waiting for the 6cm cables to arrive from ebay. Unfortunately there is no local purchase option hmmm, having said that... https://www.digikey.ca/en/products/detail/molex/0151660212/3281093 i just found this on digikey so...

here is a little video of the hdmi adapter using a shorter cable i got from digikey. here is link... http://www.kipper2k.com/pics/a600hdmi.mp4 It behaves better than with the larger cable, there...

link is 5 posts up :)