Kieran

@Wetzel402 try using `printer.lan` - that's what I'm using and it works well. You may have to explicitly add the protocol for your browser to navigate to it (ie: `http://printer.lan`)

That's a really good shout! I had tried something related to `prepare_filename` but I gave up on that approach when I found that the returned string didn't respect the file's...

@pukkandan Thanks for the tip - that ended up working out! I've updated the description and this is ready for re-review with a few notes: - This doesn't add the...

@pukkandan (not trying to rush this review, just letting you know where I'm at!) I've been playing around with the followup PR(s) I want to make and I know the...

No rush at all! Thank you for the feedback - I'll review and make those changes 👍 > The `.suffixes` trick is unreliable [...] Woof. I'm not sure how to...

> Won't the current code break -P infojson: and -P description:?, or am I misreading? I don't think so but I'll check again! The new code shouldn't touch anything that's...

Thank you! It's the same footprint as the original except for that lip. So it's 8mm on the outer diameter and 7mm tall overall. The lip is 0.5mm tall and...

Hey @rdudhagra , just checking if there are any interest for these style of PRs. If so, I have a few more changes ready to go that I'd love to...

Thank you very much! Since I have at least two more changes ready to go (simplification of the magnet carriage and a simplification of the rear idlers), would you like...

@rdudhagra I've created PRs for all the parts I've modified! Thank you for your time and your work on this project. If you would like, I can eventually create another...