Kent Williams
Kent Williams
@sevenbitbyte, this sounds like a good idea to me! Will test this out, thanks!
Hi @jgonzal13, Your likely having issues with the driver for the usb adapter for sweep. ftdi_sio is the driver in the linux kernel as of 3.0.0-19. Can you paste the...
Hi @jgonzal13 , It looks like the adapter got attached to ttyUSB1, have you edited the launch file and replaced the default "/dev/ttyUSB0" with "/dev/ttyUSB1"? -Kent
After launching the node, you will not see data for 5-8 seconds depending on the motor speed selected. This time is needed to allow the motor speed to adjust. Just...
Have you tried sending some simple commands to the sensor to make sure communication is working yet? You can use minicom or screen to test things out.
Just FYI, We plan to add a timestamp to each scan packet in the future, but it first requires increasing the serial baud rate to make room for the extra...
This is a great point! It's always been our plan to dedicate a significant amount of our efforts to examples once the hardware was dialed in. We're really close to...
Thanks for the contribution @rsnodgrass! Were you able to test on all three of these?
Thanks for letting me know, I'll look into this!
I've had this on my list, but sounds like I need to bump it!