Kelly Schrock

If we're referring to DroidPlanner here, that was my reason for adding the feature. I looked everywhere, but did not find any way to load or save a waypoint file....

Hi, sure thing, I'm using 23.08. Files are attached. FWIW, it's not that it's not working at all, but I was wondering if there's a way to control how much...

I actually use `cmavnode` for mavlink routing, and the serial port setting is 460800 baud. I'm not sure how I settled on that number, but I'll see if I can...

I upped the baud rate to 921600 and that helped a bit.

I haven't looked at some of the new Yi cameras TBH, but it would be nice to support them if possible. On Tue, Nov 28, 2017 at 7:10 AM, Chanaka...

I had a Xiaomi Yi, from 2014 or thereabouts. I understand they've been upgraded considerably since then. On Wed, Nov 29, 2017 at 11:21 AM, Chanaka De Silva wrote: >...

Yes, you should be able to just plug the HDMI cable into the Yi and see its output on the app with no problem. Any camera with an HDMI port...

As you can see in XiaomiManager.py, the python scripts are calling a socket connection on the camera to tell it what to do. What the camera does from that point...

Thanks @CaseyApptentive what we're running into is where if we specify `5.8.3`, we get build failures on Android. If we use `6.0.3`, we can build Android, but the iOS app...

@CaseyApptentive Yeah if we can just patch it for now, that's fine. Thanks!