sunsynk

sunsynk copied to clipboard

Deye-12k-SG04LP3-EU 3ph inverter - error handling Low Capacity, use_timer and progX_charge

1

### Your Inverter Deye-12k-SG04LP3-EU, Firmware 1140 This is a 3ph inverter ### Describe the issue/bug and what you expect 1. reading battery Low Capacity from the inverter is correct in...

peter-mul

Date and time

34

hello, good morning, I have another new proposal. I don't know if the same would happen in South Africa, but in Spain, I think that due to the frequency of...

cc120689

Multi Version - Direct serial interface

28

HI On the latest version, installed this morning (Sunsynk Inverter Add-on (multi): Current version: 2023.04.20b-0.3.2 (Changelog)) I get the below errors as reported in the log. The application then crash....

cakuhn

Crash when changing battery charge settings

30

### Issue related to Sunsynk / mbusd Home Assistant Add-On ### Describe the issue/bug When requesting a change to the battery settings, the add-on crashes (using Dev add-on). **Expected behavior**...

ASomerN

Total Grid Import: Does not match with actual grid import

12

### You Inverter Details about your Inverter: Sunsynk 8KW Single Phase - Firmware COMM:E426 MCU:6022-1724 ### Describe the issue/bug and what you expect The total grid import sensor does not...

kloon

max limit for max charge and discharge current

2

Existing sensor definitions can be found [here](https://github.com/kellerza/sunsynk/blob/main/sunsynk/definitions.py) ### You Inverter Sunsynk 16kw ### Describe the issue/bug and what you expect using this addon and it is working perfectly with 16kw...

trackmafia

a lot of errormasseges in the log file Register 59 and 219

11

Existing sensor definitions can be found [here](https://github.com/kellerza/sunsynk/blob/main/src/sunsynk/definitions.py) ### You Inverter Deye5kSg03LP1 Details about your Inverter: make/model/firmware Deye 5ksg03lp1 Protokoll-Version：V0.2.0.1NETZ：3384-1515HMI：0000-C367Lithium-Akku-Versionsnummer：V0.0.0.0Deutsche Version：FFFFSpanische Version：FFFFUngarische Version：FFFFItalienische Version：FFFFLCD-Typ：8100 ### Describe the issue/bug and what you...

concierge-at

Signed Values

10

I have the following custom sensors for a 50kW HV system which I believe are signed integers. What operands should be added to the code to make it handle a...

alistairts

Optimal Read Batch Size & Allowable Gap for Solarman Dongle

3

What is the optimal batch size and allowable gap for the Solaman Dongle interface? I am hitting read/write limitations within my dongle which causes it to reboot and ponder life...

alistairts

Sunsynk/Deye Inverter Add-on (edge/dev) bc65f2a does not read any values, but gives errors

3

### Issue related to Sunsynk/Deye Inverter Add-on (edge/dev) Current version: bc65f2a ### Describe the issue/bug gives error on startup **Expected behavior** continue to read values ### Your environment - Home...

bsafh