Keenan Johnson
Keenan Johnson
Hello! I'm trying to use Wifi-Connect with Balena, a Raspberry Pi CM4, and a [TL-WN722N as recommended by the Readme here.](https://github.com/balena-os/wifi-connect#supported-boards--dongles) However, I'm getting the following D-Bus error when Wifi...
I thought the nanosaur project would fit in well on this list! @rbonghi [nanosaur](https://github.com/rnanosaur) - 🦕 nanosaur is a little tracked robot ROS2 enabled, made for an NVIDIA Jetson Nano
It would be nice if this review tool showed the data coming back from UAVCAN ESCs. At minimum it should be: - Voltage - Current - Computed Power
From the ros2_rust element chat room, it was suggested that we should create an issue to setup testing for all feature combinations.
One of the promising device management solutions for a microcontroller based Frog Sensor is a platform called [Golioth.](https://golioth.io/) See the related issue on prototyping a Golioth ESP32 Device: https://github.com/Ribbit-Network/ribbit-network-frog-sensor/issues/126 One...
In #132 we discussed replacing the screws that hold the raspberry pi and the circular hole that holds the antennae with clips that are printed as part of the enclosure....
In #130 we identified that we need to go back to a Raspberry Pi CM4 version of the Frog Sensor. This task is to revise the mechanical enclosure to fit...
In Discord, we discussed that it would be ideal to identify one or more ideal suppliers for the 3d printed parts so that those without access to a 3D printer,...
As discussed in #63, one of the main challenges in creating a microcontroller based Frog Sensor is establishing a software update system that works as well as [Balena](https://www.balena.io/) does with...