kean-apple

Results 8 comments of kean-apple

[BUG] M5 crashes after commissioning completed - assert failed: xQueueGenericSend queue.c:832

I used ESP-IDF v4.4.2

Pin code Pairing with iOS ChipTool fails with timeout Error CHIP:0x00000032

[timeout-pairing-chiptool-logs.txt](https://github.com/project-chip/connectedhomeip/files/8292395/timeout-pairing-chiptool-logs.txt) [timeout-pairing-M5-logs.txt](https://github.com/project-chip/connectedhomeip/files/8292397/timeout-pairing-M5-logs.txt)

Pin code Pairing with iOS ChipTool fails with timeout Error CHIP:0x00000032

still see this randomly..Pairing reliability in general is very poor

Unable to pair Matter Thread accessory via CHIPtool CLI - expected frame counter as 744043530 when it sends a frame counter of 0

Seen again on SHA 7ab6653ec47bf0e45ec4307b43f5189cc326cca9 Steps: 1. Erase flash Nordic board to 7ab6653ec47bf0e45ec4307b43f5189cc326cca9 2. Reset the board manually once after the board is flashed by holding down the button 1...

[BUG] Pairing M5 failed - PacketBuffer: pool EMPTY after receiving Sigma3 message

I used the default: #define CHIP_DEVICE_CONFIG_MAX_EVENT_QUEUE_SIZE 100

M5 board crashes when removing fabric - abort() was called at PC 0x400e3785 on core 0

Probably dup of https://github.com/project-chip/connectedhomeip/issues/15175.

M5 board crashes when removing fabric - abort() was called at PC 0x400e3785 on core 0

still seen with 9f09e5290e5ce97f446158ac83aaf1942fc4f540 when have 2 fabrics. I don't see crash if 1 fabric only

M5 board crashes when removing fabric - abort() was called at PC 0x400e3785 on core 0

still seeing on SHA 3b834619186a84db03281a5c76f236562db27ebd