Kayla Atropos

I've been running this for 4 days, and I've found it much easier to configure, more concise, better to control, and more reliable than the previous offering. I will continue...

There is some error in this module that needs updated. Auto Z works with Mental's module, but produces an error with this one. https://github.com/protoloft/klipper_z_calibration/issues/105

Captured a partial log to help make this easier to debug https://pastebin.com/TPwAd247. I haven't pinpointed what the change was in this module as opposed to Mental's, but that module works...

I'll get you a full log tonight. I can run bed mesh, QGL, Z tilt, ect all fine. It triggers when you touch the probe to the bed after measuring...

> 1. Does the same issue occur when running `PROBE_Z_ACCURACY`? No, it probes the nozzle as the nozzle endstop is the Z endstop, not the probe. > 2. Try changing...

That won't even let it start probing. No Z movement before panic. No usable log here because that isn't relevant to auto-z as even trying to QGL or anything probe...

I no longer have a printer with both a nozzle Z and a dockable probe, so I won't be of much use on that front unfortunately. Sorry that died before...

I would very much like to see a min/max power, and scale between them. Currently "50%" doesn't mean anything related to "50%" relevant to the fan, but relevant to pwm...

Any work done on this? I have an almost perfect system thanks to the work done here. After waking from sleep (hotplug) I lose my dock until reboot. I'm not...

https://www.tonymacx86.com/threads/usb-c-hotplug-not-working.223534/ Seems like some work for general hotplug and TB3 are going on here. I thought I'd cross reference for those interested.