Karl Palsson
Karl Palsson
FWIW; given how completely stagnant this project appears to be, to simply replace nixio in openwrt with https://github.com/luaposix/luaposix I've done that in all of my own projects so far, so...
the serial mode setting is for drivers that support switching from userspace. If you have a bios setting that just turns it on automatically, there's nothing you need to do...
seems the first ! shouldn't be there, compared to openwrt luci sources at least.
It is of interest to the project, and the submitter here has done a great job of adding the requested tests. Regardless, testing on windows is not exactly something that...
I see this as well, but I don't eve see the "send auth" messages. It scans ok, but nothing can be joined. Setting up an AP fails as well: ```...
(just FYI, I'm out on holidays for til mid august unfortunately, nowhere near either my 8723bu, 8723du or 8821cu boards)
Related, I have a new out of box rtl8821cu module that reports "rfe = 0xff" so this driver aborts. I've tried the https://github.com/morrownr/8821cu driver as well, and it allows overrriding...
who's meant to be populating them, and how can I write to them? These are using pcb modules, so the antenna path is under our control, is there tooling to...
yes, because I'd attempted to get the stack right.
I'm afraid I don't have any other supported host capable boards right now, but i'll try and dig one up to compare against.