Kasper Jordaens
Kasper Jordaens
Voltages seem to be ok, although I do not have a working version at the moment to compare. I did a custom install on mine, ensuring that I can connect...
yes there seems to be some discussion on the audio jack. I just received my PCB from Squaro (ordered from Tindie) and tyhe one I got from the supplied BOM...
@alexdgourlay are you saying, you had a fully working box and it then stopped working? on mine the display works, but there is no sound, and no working encoders (I...
Same problem here, My browser is complaining about the security handshake not being the correct length. exposing a ws:// over tcp with ngrok, accessing it over wss;// in the client...
Same bug here, I tried to updated Torch and torchvision using the commandline flag as it says torch needs to be updated, don''t know if this is related, but it...
seems related to #67 I checked the power across C7, I get a steady 5.15V is that too much then? I took a fresh board, soldered only the RPi header,...
same problem here, tried building myself, and used the lite image as well... is this a hardware bug?
I did some debugging. My hardware seems to be fine, I verified the pin connections to the RPi and they are OK. If you need to verify check at least...
When cranking up the debugger using the `-d 3`flag passed on the openocd in the `Makefile` I get lot's of extra output. Still not making a lot of sense to...
@cnuty where did you get your PCB?