Kasper Jordaens

is it, at the moment, possible to have a multi-channel setup? for example jack-router allows to specify virtual outputs. They show up in my qjack-ctl ![Screen Shot 2021-03-04 at 14...

> I'm planning to fix this in 0.2 (upcoming major release). We'll see multichannel when it arrives :) > if you map each output port to a separate ALSA device,...

William, That is great having a look at the easy browsing version. also @Adam is this a sign not much is going on on the magenta side at google? Is...

I have this too, I did `pip install -r requirements.txt`, just to make sure I was all up to date, git pulled again, no difference...

same problem here, when using the SDXL inpainting model. I'm doing something wrong, cause yesterday it worked Problems with both fp16 and regular version. No problems with non inpainting models....

Hey I just read [here](https://github.com/googlecreativelab/open-nsynth-super/issues/32#issuecomment-393398718) how to do it. > To replace the file and recompile the application you will need access to the Raspberry Pi. Hook it up to...

Is it not part off the problem that the APIs of openai and gpt4all one seem to be inconsistent? Even though the docs say it's a matter of changing the...

did you flash the firmware to the STM32?

I assume you still have to flash the board, I just got mine semi-assembled, but no luck so far. Flashing does not even work follow these steps [https://github.com/googlecreativelab/open-nsynth-super#4-install-the-firmware](https://github.com/googlecreativelab/open-nsynth-super#4-install-the-firmware) --edited URL

Hey, measure the voltage on de voltage regulators it should be 3.3v if not you have faulty regulators. A batch was produced having this issue and it will have the...