Kai Krakow
Kai Krakow
I paired my controllers recently again, it resulted in the same behavior: Controller connected, paired, and immediately disconnected again. I managed to get that working again, probably with some luck,...
> Actually, nvm: I just tried again with my computer, and it just... worked? Pairing it to a different device temporarily may have done the trick. The Bluetooth implementation of...
> > You may need a very recent kernel to properly support this. > > Not a problem—I'm on Arch, running 5.9.6. Oh that famous Arch quote... 😁 haha >...
Closing old Bluetooth issues, please report to the bluez project if the problem persists.
Please run `bluetoothctl devices` to see if it is listed. If it is, remove it with `remove GAMEPAD-MAC`. Then try again. If it still doesn't work, stop your Bluetooth services,...
Did you disable ERTM? Look at `/sys/module/bluetooth/parameters/disable_ertm`.
Maybe you could try following the steps from https://github.com/atar-axis/xpadneo/issues/239 to see if it makes you a successful connection?
Story time: I got a brand new controller, and it connected flawlessly to my Linux box. I then did some more experiments with it, connecting it to a Windows box,...
Closing old Bluetooth issues, please report to the bluez project if the problem persists.
Servus! This is probably addressed to @atar-axis - I'm not sure if he can still give some insight here. He's the original author of the driver and worked through the...