k3ng_rotator_controller

k3ng_rotator_controller copied to clipboard

Feature request "Go To"

4

Hi, on every page of Nextion display there is a button "Go To" and I can enter the grid data. I would like to have a similar button where I...

bochen17

Hi, If preset potentiometer feature is enabled it is impossible to control the rotator via display buttons, CW, CCW or Stop . When I set the desired azimuth via potentiometer...

bochen17

Hey Ron, Any chance you could look into the TMC22xx and TMC5160 stepper driver support? These new TMC drivers are so much more flexible than the old DRV8825 or A4988...

jrsphoto

when going to https://blog.radioartisan.com/?page_id=48 so can't find docs

9H1LO

Alpengroove

Add the ability to invoke the Yaesu calibration commands F, F2, O, and O2, to perform the EEPROM write, without waiting for a user keystroke. Rotor position will be assumed...

KD4Z

Data display formatting with 16 x 2 LCD

1

I'm having data formatting problems with a 16x2 LCD. Depending on the values of Az and El, the string positions move, and the "°" symbol is displayed or not. ...

f6fvy

Hello. Thank you for an excellent project. I built a Rotator with an arduino mega and a VK4GHZ Nextion display. When I use, for example, a potentiometer as the azimuth...

ok2dl