Justin Widen

I've also found that paint on supports get ignored when a height range modifier is used with organic supports. You can see what I'm talking about in the vid below....

Ran into an issue today I've had many times before, **gap fill creating tiny extrusions** that do nothing but cause problems. I was originally using the **Arachne** perimeter generation, but...

I'm also having the same problem, no dialog warning or anything when I switch printers. It seems to be the same problem as this person is having, https://www.reddit.com/r/BambuLab/comments/1afbsy8/retain_print_settings_when_switching_printers_in/

Couldn't agree more on this, would love to see this as a feature. Often when I'm printing PC and go to print PLA I will try to do it as...

Oh my god thank you for this thread! I've spent the last two days trying to figure out why UART wasn't working properly. The fact that **CANBUS_ONLY** is the default...

I was having the same issue with my [ESP32-C3 Super Mini](https://www.aliexpress.us/item/3256805675863451.html) board. I tried so many things, external power supply, resetting, flashing from different methods and directly with pytool, etc....