juggler2000

Maybe mark this driver board with a "sus" and replace it as @cactus314 suggested.

oof. Had any similar wire tracing issues on the port side?

The Adafruit M4 boards, including the tiny Feather version, include more discrete interrupt pins. Here's the M4 Feather pinout: https://learn.adafruit.com/assets/101972 I think there are ~11 interrupt pins available to us...

@Digisembler mentioned he'd update CAD/STL to reflect narrower width or countersunk holes to accommodate screws now listed in BOM, which are the same as used on prior prototype build. Removing...

@Digisembler , did you update the CAD per above? We had the same issue for the PIRB build, but I wasn't sure if those were printed from a prior CAD...

@GodspeedDiscvry thinks this is all set, but asked for @streadgold to confirm before closing.

Let's keep the issues open until solutions are in the build. guide and reflected in the BOM.

@SpaceTowel , did you have this issue with the recent build? @Digisembler thinks it may have been a printer settings issue (if that's the case, need to add words to...

@streadgold, did you solve this one?

Reference point: since loading devsam on 1/29 it has not locked up (3 days ago). But at that time wifi was switched to hotspot for the update, and has not...