John Wieland comments

Results 8 comments of


                                            John Wieland

Suggestion: resetting a variable (e.g. "var") shouldn't automatically reset "var+" and "var-"

> > Really this scenario would be sooo much better suited for LUA, you could really make some thing very nice using that > > It is working perfectly fine...

OpenTx not playing 'timovr1.wav' (or 2 or 3. Radio is Taranis X9D+ 2019, OpenTx version is 2.3.14-otx (1e09791a), dated 2021-07-25. SD card contents is for installed version of OpenTx & the correct 'opentx.sdcard.version' file in the root of the SD card appears correct (2.3V0038). When using timer 1 or 2, when timer expires, no audio file is played. Countdown (beeps, haptic, voice) all work OK)

The sound files are limited to 6 letters. Any more and the system does not recognize them. Shorten the name since they are all 7 letters and they will work.

OpenTx not playing 'timovr1.wav' (or 2 or 3. Radio is Taranis X9D+ 2019, OpenTx version is 2.3.14-otx (1e09791a), dated 2021-07-25. SD card contents is for installed version of OpenTx & the correct 'opentx.sdcard.version' file in the root of the SD card appears correct (2.3V0038). When using timer 1 or 2, when timer expires, no audio file is played. Countdown (beeps, haptic, voice) all work OK)

you are correct some of the system sound files do contain more than 6 letters. I am assuming that you are creating custom sounds in lieu of the standard sound...

Firmware 2.3.15

I fly helicopter exclusively. I am trying to assist with yiur issue not troll. What version did you upgrade from? Your initial post mentioned you were going to downgrade. I...

Firmware 2.3.15

No I'm not referring to the receiver the actual 4 in 1 module has its own firmware separate from open TX Open TX passes the inputs or rather outputs through...

Firmware 2.3.15

I'm afraid you're mistaken on this one... openTXVersion 2.3.10 Recommended an update to the multimodule to a minimum of 1.3.1.69 Open TX 2.3.11 update Incorporated changes made to the multi-module...

Helicopter wizard gives wrong mixer setup for T Gain

Heli wizard sources updated to the correct source for each SD card type See [PR # 231](https://github.com/EdgeTX/edgetx-sdcard/pull/231) Thank you for reporting it.

Helicopter wizard gives wrong mixer setup for T Gain

Peter this issue was resolved with pr #231 , this can be closed