jr3us

I made additional changes on top of the above on my own version, and is working much better and allows setup for more than one bulb. It is at https://github.com/mqttblebulb/mqttblebulb...

i edited the post above and corrected the link.

Hi @chvolkmann , I have stumbled across some information that I think might cure the issue of timeouts. On the following github page https://github.com/egold555/Govee-H6113-Reverse-Engineering is a mention of the AA...

I have modified the mqtt interface to the govee bulb using the 2 second keep alive( I made it 1.5 seconds) and I have had no failures with connectivity in...

I have used the following instructions on my RPi 3b 32 bit bookworm and they worked fine. I did have to download a tar.gz file directly from GitHub as there...