JP Hansen
JP Hansen
Have same issue.. Haven’t found solution yet.. But For some reason I have a suspicion to low memory on EEPROM is causing it.. just don’t know what to pick to...
Do you have a long cable like me connecting the screen and the board? Don’t know if that can be a part of the issue.. my “glitch” starts as an...
Yeah guess so but it doesn't solve the issue 😄
Just found this: https://marlinfw.org/docs/basics/troubleshooting.html
Or maybe the simulation causes the problem. As I understand it tft35 emulate the marlin mode? So maybe it's some settings in the tft35 firmware where the solution can be...
From a thread on facebook I made got this reply: Hi I had exactly the same issue when I retrofitted one od my printers. I nearly lost my mind trying...
I'm not a code guy and don't have the guts to jump in right now but the new release of Marlin 2.0.6 could be a solution? https://github.com/MarlinFirmware/Marlin/releases
Just compared my configuration.ini with a guy who had it working without the glitch.. the only difference is his baudrate is set to 250000 mine is set to 115200. Will...
Just tested the baudrate. Changed from 115200 to 250000 and I think that fixed the problem.. SOOO f****** simple.. will report back if I'm wrong.
Do you have the baudrate set to 250000?